Mocking Up

This is the process of mocking in my CD packaging product. Materials that I have used to manufacture this design is basic corrugated cardboard, Compact disk tray, and durable vinyl stickers. During the progression of my design I began with gathering the appropriate materials that i can use at the most cheapest rate. Rather then sending the cardboard in for laser printing, I  briefly marked the foundations of the card board and then made a split down the two sides of the card board to act as the glide rails to support the compact disk base. The disadvantage of development of the design is that I have struggled on inputting the sliding pins that slot into the CD tray. Having to research information is easy but having to fabricate the product is very difficult. I way around this situation is to cut out very small pieces of opaque perspex to a reasonable size that can then be applied into the sliding rail on the CD tray. The stickering process has been inspired by the construction of our previous assignment, which was the audio terrain. Reason for having the basic structure of the stairs is because it contrasts the aesthetics of the stair well that we used for the audio terrain. Its pulls the idea behind the reasons of having the stair well reflected onto the design idea of my packaging design. I have still yet to manufacture the major products of this assignment, but obviously i have made a staring process. Development has been fully completed but as of yet I am still under the progression of manufacturing my design product.